Search

Contact us

 

 

Contact information
Message

 

Products

 

 

Roll grooving machine
Pipe cutting machine
Hole cutting machine
Pipe threading machine
Test pump
Others

About TUWEI

 

 

Company
Photo wall
Certificate
Strength

Contact us

 

 

Contact information
Message

 

Products

 

 

Roll grooving machine
Pipe cutting machine
Hole cutting machine
Pipe threading machine
Test pump
Others

About TUWEI

 

 

Company
Photo wall
Certificate
Strength

Service support

 

 

Download

Standard

FAQ

 

Service support

 

 

Download

Standard

FAQ

 

57

 

Tel:+86-576-84715288

Mob:+86-15727899721

Fax:+86-576-84715289

E-mail: sales@cntuwei.com

57

 

Tel:+86-576-84715288

Mob:+86-15727899721

Fax:+86-576-84715289

E-mail: sales@cntuwei.com

Copyright 2018 © ZHEJIANG VICTAULIC-TUWEI PIPING EQUIPMENT CO.,LTD All Rights Reserved       浙ICP备18029856号

Copyright 2018 © ZHEJIANG VICTAULIC-TUWEI PIPING EQUIPMENT CO.,LTD All Rights Reserved       浙ICP备18029856号

News

What are the specifications of roll grooving machine? And what is the application?
Roll grooving machine as a special tool is used to make a groove on the pipe end then use a mechanical joint to connect two pipes. The working principle of roll grooving machine is that the rotating down roller driven by motor makes the pipe rotate, and the upper roller moves down and presses the pipe by shaking the pump handle, then forms the groove.
Why does fire fighting pipe crack when grooving?
Grooved pipe connection is often used in the construction and installation of fire fighting pipes. Therefore, it is often necessary to groove fire fighting pipe. If the pipe cracks during grooving, it will be very annoying. Why does fire fighting pipe crack when grooving? The reasons mainly involve pipe material factors and human factors.
What are the requirements when grooving stainless steel pipe? How to groove the stainless steel pipe?
The requirements for stainless steel grooving (1)The cut should be smooth and free of cracks, bumps, shrinkage and other defects. (2)The pipe end  should be rounded, the wall thickness should be uniform, and the surface slag and oxide should be removed. (3) It is recommended to use special roll grooving machine with limit device.
How to groove galvanized steel pipe
Galvanized steel pipe is a kind of pipe based on welded pipe and plated with a layer of zinc to prevent rust and corrosion, which is widely used in water supply and drainage, gas, steam and others. Today, let‘s talk about how to groove galvanized steel pipe.
See you at the 132nd Canton Fair Online
See you at the 132nd Canton Fair Online
Page up
1
2
...
10

Copyright 2018 © ZHEJIANG VICTAULIC-TUWEI PIPING EQUIPMENT CO.,LTD All Rights Reserved       浙ICP备18029856号